Go to the device home screen

Select "Settings" app

Select "Wi-Fi"

Set "Wi-Fi" to "ON"

Select "DY-iAIS-XXXX" or "DY-WLN10-XXXX" . If another network is selected, first select the blue disclosure button next to the selected network and then select "Forget this network"

Exit "Settings"

Launch iNavX

Select "TCP/IP NMEA Client" on the iNavX "Preferences" menu

Enter the Host "169.254.1.1"

Enter Port "2000"

Select "TCP" (Note: If iAIS or WLN10 configured for UDP, then select "UDP")

Set "Enable Waypoints" to "ON" to import and and navigate to active waypoint or route of the connected GPS receiver

Set "Location Services" to "ON" If there is no GPS receiver connected to the iAIS or WLN10. This will allow iNavX to use the device "Location Services"

Set "AP Repeat" to "ON" in order to have NMEA data for the active waypoint sent to the WLN10 NMEA out while iNavX is running.

Enable "Link"

Select "Save" button