Using iNavX with MacENC
If your Mac and iPhone or iPod Touch are connected to a WiFi or
ad-hoc network you can link to the MacENC NMEA data.
 |
Select "TCP/IP"
on the MacENC "GPS" menu Note: Make sure your network is established before starting MacENC so the correct Host IP address is displayed in the MacENC TCP/IP NMEA window. In some cases the Host IP address displayed in MacENC may not be correct, so open System Preferences and select "Network" to find the correct Host IP address. |
||||||||||||||||||||||||
 |
Select "TCP/IP
NMEA Client" on the iNavX Setup menu Enter the host as shown in the MacENC "TCP/IP NMEA Data" window Server "Host" Enable "Link" Enable "Enable Waypoints" |
||||||||||||||||||||||||
 |
Select "Instruments" on the iNavX menu to see the NMEA data being received via TCP/IP from MacENC | ||||||||||||||||||||||||
 |
If "SailTimer"
is activated in MacENC, it's respective data will be repeated to the iNavX
Instruments view:
|